HG1-0300
Wind Turbine » Hybrid (wind & solar) » HG1-0300
WT-0300 Wind Turbine | |
Type | Horizontal axis up-wind |
Rated power | 300W(12m/s) |
Rated rotor speed | 830 rpm |
Output voltage | 12VDC |
Rotor diameter | 1,360mm |
Weight (incl. blade) | 11Kg |
Blade material | PP+GF |
Body material | Aluminum Alloy |
Generator | Three-phase synchronous permanent magnet generator |
Yaw control | Free(360°) |
Start-up wind speed | 2.5m/sec |
Control system | Auto safety control |
Braking system | Electronic stall regulation |
Survival wind speed | 60m/sec |
Hybrid Controller | |
System voltage | 12VDC |
Max open voltage | 50Vac |
Max circuit | 40A |
Max open voltage | 70VDC |
Max circuit | 20A |
Max load circuit | 10A |
Cut out voltage | 11.5VDC |
Operating voltage | 10~15VDC |
Float voltage | 14VDC |
Dip switch mode | 2hr, 4h, 6hr, 8hr, 10hr, 12h, durative or be off in night |
Protect | LVD protect, over load, ground, manual break |
Alarm | Load blink alarm, voltage unusual alarm |
Display | Voltage display, start light display |